FLIR (Point Grey) Grasshopper USB3 Colour (IMX174) 5.86µm

can be shipped within 7-10 days

£799.00

Price includes VAT, plus delivery

Description

The Grasshopper3 camera line combines large format, high resolution, CCD and CMOS sensors, with the throughput capabilities of USB 3.0 for maximum performance. It is ideal for a wide variety of demanding applications including flat panel inspection, 3D measurement, ophthalmology, flow-scanning cytometry, and fluorescence imaging.

It's FPGA and frame buffer-based architecture provides optimal reliability, a rich set of features, and a full image processing pipeline including color interpolation, gamma, and lookup table functionality

This model features a colour sensor (Sony IMX 174)

Sensor size is 1/1.2"(1920x1200) and pixel size is 5.86 µm for a total of 2.3MP

Maximum frame rate of 162 FPS @ 1920x1200

It is supplied with Drivers and Software

A/D Converter	14-bit (10-bit GS3-U3-23S6, GS3-U3-41C6)
Video Data Output	8, 12, 16 and 24-bit digital data
Image Data Formats	Mono8, Mono12, Mono16 (all models) RGB, YUV411, YUV422, YUV444, Raw8, Raw12, Raw16 (color models)
Partial Image Modes	Pixel binning and region of interest (ROI) modes
Image Processing	Gamma, lookup table, hue, saturation, and sharpness
Shutter	Global shutter; Automatic/manual/one-push/extended shutter modes Up to 32 seconds (GS3-U3-28S5, GS3-U3-60S6, GS3-U3-91S6); up to 30 seconds (GS3-U3-28S4); up to 4 seconds (GS3-U3-41C6); up to 3.2 seconds (GS3-U3-23S6); up to 2 seconds (GS3-U3-50S5)
Gain	Automatic/manual/one-push modes 0 dB to 18 dB GS3-U3-23S6; 0 dB to 24 dB GS3-U3-28S4/GS3-U3-28S5; 0 to 10.1 dB GS3-U3-41C6; -6.51 dB to 24 dB GS3-U3-50S5; -6.158 to 24 dB GS3-U3-60S6; -9 to 24 dB GS3-U3-91S6
Gamma	0.50 to 4.00, programmable lookup table
White Balance	Automatic/manual/one-push modes
High Dynamic Range	Cycle 4 gain and exposure presets (CCD models only)
Color Processing	On-camera in YUV or RGB format, or on-PC in Raw format
Digital Interface	USB 3.0 interface with screw locks for camera control, data, and power
Transfer Rates	5 Gbit/s
GPIO	8-pin Hirose HR25 GPIO connector for power, trigger, strobe, PWM, and serial I/O, 1 opto-isolated input, 1 opto-isolated output, 2 bi-directional I/O pins
External Trigger Modes	Standard, bulb, overlapped, and multi shot trigger modes
Synchronization	Via external trigger or software trigger
Image Buffer	128 MB frame buffer
Memory Channels	2 user configuration sets for custom camera settings
Flash Memory	2 MB non-volatile memory
Dimensions	44 mm x 29 mm x 58 mm excluding lens holder, without optics (metal case)
Mass	90 grams (without optics or tripod mounting bracket)
Power Consumption	5-24 V via GPIO or 5 V via USB 3.0 interface, maximum 4.5 W
Camera Control	Via FlyCapture SDK or third party software
Camera Updates	In-field firmware updates
Lens Mount	C-mount
Temperature	Operating: 0° to 50°C; Storage: -30° to 60°C
Compliance	CE, FCC, RoHS
Operating System	Windows, Linux (32- or 64-bit)
Warranty	3 years