Point Grey is now FLIR. Selling off due to re-branding and stock revision
The Blackfly camera line combines Power over Ethernet, highly sensitive sensors, industry-leading affordability and a host of unique features for uncompromising value. Every Blackfly model comes packed with functionality designed to maximize performance and reliability, including a 16 MByte frame buffer; LED status indicators; and an on-camera image processing pipeline that provides color interpolation, gamma, and lookup table functionality. The Blackfly camera weighs just 36 grams, measures 29x29x30mm and uses 2 watts of power.
This model features a mono sensor (Sony ICX 692)
Sensor size is 1/3"(1288x728) and pixel size is 4.08µm for a total of 0.9MP
Maximum frame rate of 30 FPS @ 1288x728
The is supplied with Drivers, Genika Astro Image Capture Software, 3m X-Over Ethernet Cable and GPIO Power connector. The camera requires a suitable 5-15V DC Power Supply
|
A/D Converter
|
10-bit (BFLY-PGE-13E4)/12-bit
|
|
Video Data Output
|
8, 12, 16 and 24-bit digital data
|
|
Image Data Formats
|
Mono8, Mono12, Mono16, Raw8, Raw12, Raw16 (all models); RGB, YUV411, YUV422, YUV 444 (color models)
|
|
Partial Image Modes
|
Pixel binning, decimation, and region of interest (ROI) modes
|
|
Image Processing
|
Gamma, lookup table, hue, saturation, and sharpness
|
|
Shutter
|
Global shutter; Rolling shutter (BFLY-PGE-14S2/BFLY-PGE-23S2); Automatic*/manual/one-push* (*free running only for CMOS)
0.038 ms to 3 seconds (BFLY-PGE-05S2); 0.1 ms to 3 seconds (BFLY-PGE-09S2); 0.015 ms to 1 second (BFLY-PGE-13E4)
|
|
Gain
|
Automatic*/manual/one-push* (*free running only for CMOS)
0 dB to 24 dB (BFLY-PGE-05S2); -4.5 dB to 24 dB (BFLY-PGE-09S2); 0 dB to 18 dB (BFLY-PGE-13E4)
|
|
Gamma
|
0.50 to 3.99, programmable lookup table
|
|
White Balance
|
Automatic*/manual/one-push* (*free running only for CMOS)
|
|
Color Processing
|
On-camera in YUV or RGB format, or on-PC in Raw format
|
|
Digital Interface
|
Gigabit Ethernet interface with screw locks for camera control and data; Power over Ethernet
|
|
Transfer Rates
|
10/100/1000 Mbit/s
|
|
GPIO
|
6-pin Hirose HR10A-7R-6PB GPIO connector for trigger, strobe, and power
|
|
External Trigger Modes
|
Standard, low smear (BFLY-PGE-05S2, BFLY-PGE-09S2), overlapped (BFLY-PGE-05S2, BFLY-PGE-09S2), multi shot
|
|
Synchronization
|
Via external trigger or software trigger
|
|
Image Buffer
|
16 MB frame buffer
|
|
Memory Channels
|
2 user configuration sets for custom camera settings
|
|
Flash Memory
|
512 KB non-volatile memory
|
|
Dimensions
|
29 mm x 29 mm x 30 mm excluding lens holder, without optics (metal case)
|
|
Mass
|
36 grams (without optics)
|
|
Power Consumption
|
Power over Ethernet (PoE); or 12 V nominal (5 - 16 V) via GPIO interface, maximum 2.5 W (2 W BFLY-PGE-13E4)
|
|
Machine Vision Standard
|
GigE Vision v1.2
|
|
Camera Control
|
Via FlyCapture SDK or GigE Vision third party software
|
|
Camera Updates
|
In-field firmware updates
|
|
Lens Mount
|
CS-mount (5 mm C-mount adapter not included)
|
|
Temperature
|
Operating: 0° to 45°C; Storage: -30° to 60°C
|
|
Compliance
|
CE, FCC, RoHS
|
|
Operating System
|
Windows, Linux (32- and 64-bit)
|
|
Warranty
|
3 years
|
