The JJC TM-A Multi-Function Timer remote control provides a simple trigger function and can activate the bulb function on cameras. It also functions as a timer remote and can be programmed to function as an intervalometer.

TM-A Multi-Function Timer Features

Remote control with an 90cm cord and a self-timer, interval timer, long-exposure timer, and exposure-count setting feature.

Timer can be set anywhere from 1 sec. to 99 hrs., 59 min., 59 sec.

Maximum number of exposure is 399.

Uses 2 x AAA batteries (supplied). Will run for up to 2 wks on one set of batteries!

Compatible with the following cameras

CANON EOS 5D / EOS 1D / EOS 1D Mark II / EOS 1Ds / EOS 1Ds Mark II /  EOS 30D / EOS 20D / EOS 10D / EOS D60 / EOS D30 / EOS 40D / EOS 5D / EOS 1V / EOS 3 / EOS D2000 / EOS 1D Mark III / EOS 50D / EOS 5D Mark II / EOS 7D / EOS 1D Mark IV

The JJC TM-B Multi-Function Timer remote control provides a simple trigger function and can activate the bulb function on cameras. It also functions as a timer remote and can be programmed to function as an intervalometer.

TM-B Multi-Function Timer Features

Remote control with an 90cm cord and a self-timer, interval timer, long-exposure timer, and exposure-count setting feature.

Timer can be set anywhere from 1 sec. to 99 hrs., 59 min., 59 sec.

Maximum number of exposure is 399.

Uses 2 x AAA batteries (supplied). Will run for up to 2 wks on one set of batteries!

Compatible with the following cameras

NIKON D2H / D1x / D1h / D1 / D2x / *D100 / D200 / F5 / D2Xs / D3 / D300 / D700 / F6 / F100 / F90 / F90x / D3x / D300s / D3s

KODAK DCS-14n

FUJIFILM Finepix S3pro / Finepix S5pro

*via D100 Vertical Battery Pack

The Hama DCCS is an multi-function timer remote control. It is a modular unit requiring you to add the specific connection cable for your camera model

This cable is for use with the DCCS mulit function timer remote and Nikon cameras that use the Nikon MC-DC2 Remote

This cable is for use with the DCCS mulit function timer remote and Canon cameras that use the Canon RS-60 Remote

This is a T2 Mount adaptor. It allows you to connect Canon EOS mount cameras to accessories which have a T2 thread on them. When fitted the camera will only operate in manual mode. This adapter provides the standard 55mm back focus distance from its face to sensor when fitted.

This is a special ultra short T2 Mount adaptor. It allows you to connect Canon EOS mount cameras to accessories which have a T2 thread on them. When fitted the camera will only operate in manual mode. This special version has a 0mm optical length leaving the standard 44mm back focus distance to the sensor.

Baader Ultra-short T-Ring to connect Canon EOS cameras to a T2 thread. Ultra-short T-ring with an optical path length of 2mm. The last hope for achieving the focus when nothing else helps! The optical length of this ultra-short T-ring is 2mm - compared with the usual 11mm, you have gained 9mm Backfocus. Telescope side: T-2 internal thread.

This is an M48 Mount adaptor. It allows you to connect Canon EOS mount cameras to accessories which have an M48 thread on them. When fitted the camera will only operate in manual mode. The back focus distance from the face of the adapter to sensor is 55mm

This is a Nikon F T2 Mount adaptor. It allows you to connect Nikon F mount cameras to accessories which have a T2 thread on them. When fitted the camera will only operate in manual mode. When fitted the mount provides 55mm back focus to the sensor from the face of the mount.